PalletPal 360?彈簧升降臺是原始的自動調平彈簧升降臺，可以更快，更安全，更輕松地裝卸托盤。這種簡單的彈簧升降臺采用彈簧和減震器系統，可以隨著托盤上貨物的添加降低臺面高度和貨物的移除去提升臺面的高度。轉盤頂部允許近側裝載和卸載。無需電源供應。這種彈簧升降臺可輕松處理高達2噸的載荷。
許多設備升降臺可在標準發貨期內發貨。致電 +86 021-57491919或 發送郵件到 sales@southworth-apac.com
● 自動調平操作無需操作員調整
● 堅固的管材機架，可承受高達2噸的負載。
● 重型彈簧經過校準，可將托盤帶到 方便的高度。
● 經驗證的連桿機構的設計可在不均勻負載下保持水平。
● 減震器提供穩定的逐漸升高和降低過程，無過沖或彈跳。
● 用于支撐轉盤旋轉的軸承具有很小的摩擦阻力并可以用于近側裝卸
● 酚醛樹脂蓋板（可選）。
● 用于叉車重新定位的叉槽也可延伸底座，以實現穩定的自由放置。
● 調平腳（可選）允許在傾斜或不平的地板上使用。
● 獨立式，可以通過叉車輕松重新定位。
Sits above the palletizer, but under the turntable ring. Keeps debris from collecting under the unit
Solid steel disc cover in place of open turntable ring. Ideal for damaged pallets or small / odd sized pallets or skids.
Mounts under unit in fork pockets to allow palletizer to be portable. A foot operated floor lock keeps the unit from rolling when in use.
For use on uneven or damaged floors. 4 adjustable screw feet can be independently adjusted to ensure the palletizer is perfectly level.
Black and yellow vinyl skirting wraps entire unit to keep underneath free from debris. Pleats expand and contract as unit raise and lowers.
Handy step slips into fork channels to give shorter workers better access to the top of loads. Non-skid surface.
Units can be equipped with a square turntable instead of the standard ring. Use with small or odd shaped skids or pallets.
PalletPal 360 is available with a variety of custom finishes including special paint colors, chemical resistant coatings, two-part epoxies, hot-dipped galvanizing. Stainless steel construction is also available.
索斯沃斯（上海）升降設備有限公司電話: +86 021 57491919 | 傳真: +86 021 57494281 | 網站地圖 | 滬ICP備07027643號-1 |滬公網安備 31011202014811號